1 of 11
Adjust-a-Sink
£
£
£
£
K100 SERIES
**INSTALLATION INSTRUCTIONS**
10/2011
Congratulations on the purchase of your new Adjust-a-Sink
®
System-the elevating sink that
offers the ultimate in comfort and safety.
The Adjust-a-Sink
®
System utilizes a unique hydraulic lift
mechanism and a UPC listed, patented 3-stage telescoping plumbing unit* that allows the operator to
raise and lower the shampoo bowl a total of 12” simply by pumping the convenient foot pedal. This
foot pedal can also be rotated to the side, providing the stylist an unobstructed work area when
needed.
The Adjust-a-Sink
®
System was designed with simplicity and long lasting durability in mind. The lift
system, cultured marble shampoo bowl, laminated panels and chrome plated pump make the entire
system easy to clean and virtually maintenance free.
IMPORTANT: Please read through all these instruction sheets and become familiar with all the
parts and requirements PRIOR to installation. Although the system can be installed in most
work areas with the proper water and waste connections, there are necessary steps that are
very important to follow to ensure the proper operation of the Adjust-a-Sink®. Refer to the
appropriate local and state codes as it applies to the location of the waste drain and use of a
hair trap (interceptor) for your particular installation.
The following Step-by-Step Instructions reference the following Accessible Systems drawings:
K100 Overall Assembly, Sheet 1
K100 Overall Assembly, Sheet 2
K100-87 Plumbing Rough-In Drawing
Required Hardware/Supplies Not Included:
1 ½” White PVC UPC Listed P-Trap, ½” ID Rigid
Copper Tubing, 90 Degree Supply line shut-off valves, Long-Length Sheet Rock Screws, 5/16” Bolts-
Washers-Nuts (if mounting to cabinet), Plumbing Supplies such as Plumbers Putty, Sealant, Silicone
Caulk, etc.
Thank you for purchasing the Adjust-a-Sink®. For replacement part orders or further
information please contact Customer Service at: Accessible Systems LLC - 2940 Weeks Ave
S.E. Minneapolis MN 55414
Local Building Codes May Apply. Adjust-a-Sink® is a registered trademark of Accessible Systems, LLC
*Patent Numbers 5,893,396 5,867,847
