ADJ Products, LLC - www.adj.com - ON-X User Manual Page 17
ADJ Products, LLC - www.adj.com - ON-X User Manual Page 16
ON-X UC IR Control
The
UC IR
infrared remote gives you control of various functions
.
To control the fixture you must aim the remote at the front of the fix-
ture and be no more then 30 feet away.
STAND BY
-
Pressing this button will blackout the fixture.
FULL ON
-
Hold this button down to fully light up the unit. When you
let the button go, the unit will return to its previous state.
FADE/GOBO
-
This button is invalid for this fixture.
“” and “DIMMER -” -
These buttons are used to adjust
the output intensity.
STROBE
-
Press and hold this button for random strobing. Press the
button to activate sound active strobing.
COLOR
-
Press this button and use buttons 1-4 to select either of
the RGBW colors.
1-9
-
When in color or show mode these buttons will allow you to se-
lect your desired color or show. See Color or Show for more info.
SOUND ON & OFF -
These buttons activate and deactivate the
sound active mode.
SHOW 0 -
This activates the show mode. Press the Show 0 button
to activate random show mode, or use buttons 1-2 to select a preset
show.
ON-X 2 Channel Mode
Channel Value
Function
1 SHOWS
0 - 7 OFF
8 - 15 SHOW 0
16 - 23 SHOW 1
24 - 31 SHOW 2
32 - 39 SOUND ACTIVE
40 - 255 NO FUNCTION
2 SHOW SPEED/SOUND SENSITIVITY
0 - 255 SHOW SPEED SLOW - FAST
0 - 255 LEAST SENSITIVE - MOST SENSITIVE
When Channel 1 is between the values of 8-31, Channel 2 will control
show speed.
When Channel 1 is between the values of 32-39, Channel 2 will con-
trol sound sensitivity.
