ADInstruments ML1101, Руководство пользователя

Страница: 12 / 20

4
Operation
Connections
Connect this device to our electronic stimulator (1001).
1. Connect the power cable of the electronic stimulator.
Note: For information on how to connect the power
cable of the electronic stimulator and how to
connect it to ground, refer to the Operator’s
Manual supplied with the electronic stimulator.
2. Turn off the electronic stimulator before connecting the
isolator output connector (to ISO connector) on the
electronic stimulator to the INPUT connector on this
device using the supplied connecting cable.
Note: Be sure to securely lock the connectors to
prevent accidental disconnection.
3. Set the STIM/OFF switch on this device to “OFF”.
4. Turn on the electronic stimulator.
5. Connect the stimulation electrode leads to the OUTPUT
terminals on this device.
Do not touch the connector pins. Discharge
electrostatic energy by touching a grounded
metal part before connecting. The instrument
may be damaged by electrostatic energy.
CAUTION
OUTPUT terminals
STIM/OFF switch
to 1001 Connect cable