OPERATING AND USER MANUAL QUARTZ series CXP
9
Cleaning of the camera
2.2.3.
The camera shall NEVER be immersed in water or any other fluid. For cleaning, only use a light moist
tissue.
Maintenance
2.2.4.
No specific maintenance other than cleaning is applicable.
Repair and modification
2.2.5.
Repair, modification and replacement of parts shall be done only by Adimec to maintain compliance
with the directive 89/336/EEC electromagnetic compatibility and directive 72/23/EEC low voltage
directive and the international standards.
Peripheral equipment
2.2.6.
For safety, use an external SELV qualified power supply. Maximum current 1 A.
For safety, peripheral equipment must either be double isolated or SELV qualified.
Mounting / Mechanical
2.2.7.
Connectors
Take care during handling of the camera. Connectors should not be damaged.
Prevent the entry of foreign objects or dirt into the connectors, as this will result in unreliable operation
or damage.
Mounting screws
Take notice of the maximum length of the screws that may be used for mounting of the camera. Using
screws too long can cause damage to the camera. Maximum screw length: 5 mm.