12
ADICOS M-BUSMASTER XF
420-2410-003 EN20
FuNCTIONING
4 Functioning
The
ADICOS M-BUSMASTER XF
serves as the interface between the computer and the detectors.
The M-Busmaster facilitates communication between the master computer and the devices in
the
ADICOS
series, and it serves as a level converter for the signals from the M-Bus to RS-232.
An additional
ADICOS M-BUSMASTER XF
can act as a repeater to expand large systems. This
allows the network to be extended and the number of devices connected to be increased.
5 Installation
DANGER!
Incorrect installation of the
ADICOS M-BUSMASTER XF
detectors can cause mal
-
functioning, leading to failure of the fire detection system.
• Only properly trained personnel may perform installation work.
• Deenergize the entire detector system before performing any type of instal
-
lation work!
5.1 Requirements of Mounting Location
The
ADICOS M-BUSMASTER XF
is not approved for use in potentially explosive areas and may
never be used in such areas.
5.1.2
Protective Measures
To ensure smooth operation of the
ADICOS M-BUSMASTER XF
, always consider the following
factors when choosing a place to attach the device.
Temperature
Even under the most unfavorable conditions, the ambient temperature at the mounting loca
-
tion must remain within the temperature range specified for the
ADICOS M-BUSMASTER XF
(Refer to Chap. 10, »Technical Data«).
Moisture
When choosing a place to install the
ADICOS M-BUSMASTER XF
, take into consideration that it
may not be exposed to moisture. Keep in mind that water could be used for cleaning purposes
near the mounting location.
