DMX RX
Art Nr: AH-DMX-RX
How to
Link
1. Power on the Transmitter and the Adhoc DMX RX.
2. On the Transmitter, press and release the button.
The transmitter will now search for any unlinked Receivers and Link them.
If successful, Link LED on the Adhoc DMX RX will turn Yellow.
Unlink One
On the Adhoc DMX RX, press and hold the UNLINK button for
3 seconds to unlink it from a Transmitter.
If successful, Link LED on the Adhoc DMX RX will turn Blue.
Unlink All
On the Transmitter, press and hold the button
for more than 3 seconds to unlink all of its receivers.
Adhoc Wireless DMX Receiver
Thanks for choosing Adhoc DMX RX!
Please read these instructions carefully and retain it for future reference.
Features
• 2.4Ghz Lumenradio CRMX receiver
• 1 DMX universe up to 512 channels
• Link range up to 1000 meters
Technical
Operating voltage
200–265V AC
Ambient temperature
10–35 °C
(operating)
Range
0–1000m line-of-sight
Latency
Fixed 5 ms end-to-end
Antenna type
Chip antenna
Operating frequency
2402–2480 MHz
Receiver sensitivity
0.1% BER: Typ. -93dBm
DMX frame size
0–512
DMX frame rate
0.8–830 fps
Dimension (LxWxH)
139.8 x 44.9 x 26 mm
Protection class
IP20
DMX Output
Wired serial communication.
DMX+, DMX- and GND signal
will be connected to the
3-position screw terminal block.
Adhoc Wireless DMX Reciever
Art Nr: AH-DMX-RX
Unlink
Data
+
Data
-
GND
N
L
IN
PU
T
23
0V
~
Made in Sweden
D
M
X
O
UT
DMX RX
Main Input
200–265V AC.
L and N signal will be
connected to the 2-position
screw terminal block.
Installing
Turn
