Adeunis RF ARF44, Руководство пользователя, Страница: 13 / 17

Ref. 08-07-V5-lmn p. 11
A
RF44
User Guide
Set of commands
Commands Description
Operating mode selectin
ATO Return back to transceiver mode.
<silence>+++<silence> Command mode activation. The +++ sequence must be
preceded and followed by a calibrated silence (no other
character)
Registers management
ATSn? Displays the Sn register content where n represents the
register number.
The response has the following format:
Sn=y<cr><lf>
ATSn=m Sets the Sn register value with ‘m’. n represents the register
number..
AT&W Saves the new register configuration in EEPROM. Each time
you switch on the modem, the EEPROM configuration will be
loaded in the modem registers.
AT/S Displays all register values. The response has the following
format:
Sxxx=y<cr><lf> for each register.
AT/V Software version display. The response has the following
format:
Adeunis RF : ARF34 Vxx.yy<cr><lf>
ATR Restore the register default values
ATPWD=m m = pin code (register S205) : unlock all AT commands.
m = 0000 : set registers to default value and unlock all AT
commands.
Test modes
ATT1 Pure Carrier (data=0) transmission using current channel.
The output of this mode is achieved by reception of any
character on the serial link.
ATT2 Pure Carrier (data=1) transmission using current channel.
The output of this mode is achieved by reception of any
character on the serial link.
TOP