2
INTRODUCTION
3
REQUIREMENTS
Whether it is hard-to-reach barcodes or frequent moving in the workplace, the
NuScan 4000 is a barcode scanner designed to simplify your job and be more
productive. Equipped with a Class II Bluetooth that provides a reliable 30m wireless
data transfer range and a lightweight structure that is perfect for warehouses, repair
shops, factories and other work settings, the scanner’s laser diode scans at a rate
of 100 scans per second with precision and ease. The NuScan 4000 comes with
a patented cradle that helps extend battery life, giving you enough power to do
25, 000 scans before another recharge is necessary.
5
INSTALLATION
NuScan-4000 040113 V1.0
Quick
Guide
English
www.adesso.com
1
Bluetooth Wireless Barcode Scanner
Model: NuScan 4000
4
NuScan 5000
Quick Start Guide
CONTENTS
DESCRIPTION
66
RESET SCANNER
SPECIFICATIONS
7
8
9
Note:
If you need to make changes in the configuration of the scanner for specific
applications, a full Programming Guide can be downloaded at:
http://www.adesso.com/download/user-manual/NuScan4000.pdf
LIMITED WARRANTY
ADESSO provides one year limited warranty for the quality of all its products in materials
and workmanship.
During this period, ADESSO will repair or replace all merchandise, which proved to be
defective. However, ADESSO will not warranty any product which has been subjected to
improper freight Handling, shipping abuse, neglect or unauthorized repair or installation.
The warranty also will not cover products installed with Non-ADESSO components and
product with broken sealed and assembly trace. After replacement of RMA, ADESSO
reserves the right to request the total cost of the replacement products with broken seals
or assembly trace.
If you discover a defect, Adesso will, at its option, repair or replace the product at no
charge to you, provided you return it during the warranty period with transportation
charges pre-paid to Adesso. You must contact Adesso at [email protected] for a
Return Merchandise Authorization number (RMA) prior to returning any product. For
each product returned for warranty service, please include your name, shipping address
(no P.O. Box), telephone number, copy of the bill of sale as proof of purchase and have
the package clearly marked with your RMA number.
SUPPORT
We have listed most of our FAQ’s (Frequently Asked Questions) at:
http://www.adesso.com/faqs.asp.
Please visit our FAQ Service & Support pages before
you contact our E-mail or Telephone Support.
Email Support:
If our FAQ’s do not help you resolve your issues, please email
Telephone Support:
Toll Free: (800) 795-6788
9:00AM to 5:00PM PST Monday - Friday
• Light Source: 650 nm Laser Diode
• Depth of Field:
up to 400 mm
•
Scan Rate: 100 scans/ second
•
Reading Angle: 38°
• Communication: Bluetooth 2.1 Compliant
• Radio Range: 150 ft (Open Area)
• Minimum Bar Width: 4 mil @ Code 39
• Print Contrast: >45%
• Memory Size: 1 MB (stores up to 65,000 sets EAN13)
• Cradle Connection: USB
• Operating system: Windows 8, 7, Vista, XP, 2000
Mac OS X and above
• Connectivity Interface: USB port
LED
INDICATOR
HANDLE
POWER SWITCH
SCAN WINDOW
BUZZER
TRIGGER
2.
CAUTION
To avoid damage to the eyes. Do not look directly into the laser beam.
WIRELESS OPERATION MODE 1
LED INDICATOR STATUS
Quick
Guide
English
www.adesso.com
1
Bluetooth Wireless Barcode Sc
anner
Model: NuScan 4000
Turn on your computer and let your operating system load com-
pletely. Plug in the USB cable to the USB port. Your operating
system will detect the device automatically. This device is plug and
play, no driver is required.
1.
Press down the power switch located on the bottom of scanne.
Then, place it onto the cradle to charge it for 7~8 hours at the first
time use.
Orange LED Steady ON
Battery fully charged
Orange LED Flash
Charging / Low battery
Red LED ON (Once)
Barcode not readable
Red LED Steady ON
Green LED ON (Once)
Good read
Orange LED ON (Once)
Good read (Data Storage Mode)
Offline/ Cradle is not connected to PC
When the power of battery is too low, the Orange LED will flash with
1-beep tone, please charge it immediately before the scanner man-
datorily shuts down. When the scanner shuts down, please place it
onto the cradle to fully charge and then restart it.
3.
Cradle
After powering ON scanner, the ORANGE LED will flash with
2-beep tones, and the RED LED will be OFF if the scanner and
cradle are able to link within the wireless signal range.
4. Scan the barcode labeled on the bottom of cradle sequentially if the
RED LED is steady on.
POWER SWITCH
5. The wireless scanner is ready to use now.
Start of Configuration
RESET
Demo
.
Demo
.
Scan “Start of Configuration” to initiate setting.
Scan “RESET” to reset all parameters back to
default vales.
Data Transmission Mode
Within 2.4GHz Radio Range
Scanner will transmit data to PC/ terminal directly after triggering scanner.
Demo
%M%A%F
Beyond 2.4GHz Radio Range
Scanner will save scanning data into the internal memory of scanner if it’s out of
wireless signal. The saved data will be automatically transmitted to PC/ terminal
while scanner is within wireless range.
Scan this barcode to activate Data Transmission
Mode. Green/ Orange LED flashes by ending with
3-beep tone.
Demo
%E%R%A
Note: We recommend to scan the barcode of “Clean Memory Data" when
interchanging wireless operation modes to avoid data errors.
Clean Memory Data
Clean up all data stored in memory by scanning this
barcode. Green/ Orange LED flashes by ending with
3-beep tone.
WIRELESS OPERATION MODE 2
Data Storage Mode
Scan this barcode to activate Data Storage Mode.
Scanner saves all scanning data into the internal
memory of scanner
. Green/ Orange LED flashes
by ending with 3-beep tone.
Demo
%M%A%N
Demo
%E%R%A
Clean Memory Data
Clean up all data stored in memory by scanning
this barcode. Green/ Orange LED flashes by
ending with 3-beep tone.
Demo
%R%E%C
Transmit Memory Data
Transmit stored data from memory to PC/ terminal
by scanning this barcode. Green/ Orange LED
flashes by ending with 3-beep tone.
Note: We recommend to scan the barcode of “Clean Memory Data" when
interchanging wireless operation modes to avoid data errors.
LED Indicator Status
Description
