4178-15
1.0
Assembly Instructions (English)
Tel: (212) 736 4440 Fax: (212) 736 4806
www.adessohome.com
ASSEMBLY INSTRUCTION FOR
Hunter Floor Lamp
Model# 4178-15
21 Penn Plaza Suite 909 New York,NY 10001
1. Screw tube (B) onto base (A) clockwise until tight.
2. Place metal ring (C) onto tube (B) and tighten it
by tube (D).
3. Place metal ring (E) onto tube (D) and tighten it
by tube (F).
4. Insert socket holder (G) into tube (F) and tighten
it with screw (I) by using wrench (H).
Note: The socket holder arm should face the
front of the base, with the cord coming out of
the back of the base.
5. Place the shade (J) onto socket and tighten it
with socket ring (K).
GENERAL PRODUCT INFORMATION:
This product is suitable
for dry locations only.
---------------------------------------------------------------
IMPORTANT SAFETY INSTRUCTIONS:
This portable lamp has a polarized plug as a feature to reduce
the risk of electric shock (one blade is larger than the other).
This plug will fit in a polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse the plug. If it still does
not fit, contact a qualified electrician.Do not use with an
extension cord unless the plug can be fully inserted.
DO NOT
ALTER THE PLUG .
-------------------------------------------------------
BULB TYPE:
Use only with maximum of 1*150 watt
3-way incandescent bulbs (bulbs not included).
PARTS DIAGRAM
(1) * wrench (H)
(2) * screw (I)
(1) * socket ring (K)
