Please read and save these instructions:
ASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS
Amelia Bonus Pack #1594-22
Be careful when unpacking the lamp since the wires are
connected. If the wires are pulled out of their connectors, it may
result in a bad connection.
Floor Lamp
1. Carefully unpack and place all parts on a soft, flat surface.
2. Insert tube (B) into lamp base (A), gently twist to tighten.
3. Insert tube (C) into tube (B), twist to tighten.
4. Insert tube (D) into tube (C), twist to tighten.
5. Insert socket assembly (E) into
tube
(D), twist to tighten. Gently pull any
excess cord from the lamp base.
6.Place shade(F) onto socket
assembly
(E).
7.Tighten socket ring(G) onto socket assembly (E) to secure shade.
8. Use with one
100 watt max
standard bulb or 3-way CFL equivalent. Do
not exceed maximum wattage as specified on the socket label.
Table Lamp
1.Carefully unpack and place all parts on a soft, flat surface.
2 Insert tube (B) into lamp base (A) gently twist to tighten
IMPORTANT SAFETY INSTRUCTIONS
Many people are choosing to use energy efficient CFL light bulbs.
This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to
Some CFL bulbs may change the functionality of the lamp.
reduce the risk of electric shock. This plug will fit in a polarized outlet only one way. If the plug does
For example: if this lamp has a low/high/off function or 3-way switch,
not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never
then when using the CFL bulb on the low setting the bulb may either
use with an extension cord unless plug can be fully inserted. Do not alter the plug. Indoor use only.
flicker or not work. We recommend only using at the “high” level.
Indoor use only in dry location
2. Insert tube (B) into lamp base (A), gently twist to tighten.
3.Fasten socket assembly(C) onto
tube(B). Be
careful not to twist power cord tighten securely.
4.Place shade(D) onto socket
assembly(C).
5.
Tighten socket ring (E) onto socket assembly (C) to secure shade.
6. Use with one
100 watt max
standard bulb or 3-way CFL equivalent.
Do not exceed maximum wattage as specified on the socket label
.
Indoor use only in dry location.
Unplug to change bulb or clean the lamp.
Remove cellophane cover from the shade before use.
Keep cellophane out of reach of children and pets
353 West 39
th
Street 2
nd
Floor NY, NY 10018
Tel: (212) 736 4440 Fax: (212) 736 4806
www.adessohome.com