adept technology SmartFleet EX, Руководство пользователя

Страница: 25 / 54

Chapter 3: Connectors and Indicators
3.3 Connecting a Monitor
A monitor will only be needed for major OS upgrades in the field, and is not commonly used.
To connect a monitor with a VGA connector or a DVI connector:
l
Connect the monitor to the VGA (blue) connector on the Adept SmartFleet EX
or
l
Connect the monitor to the DVI (white) connector on the Adept SmartFleet EX.
3.4 Connecting to a Network
To attach your Adept SmartFleet EX to a network, or broadband device, connect an Ethernet
cable between the device and one of the Ethernet ports on the Adept SmartFleet EX. The appli-
ance may have only one available Ethernet port, if no GigE cards are installed. Do not use the
Maintenance Ethernet port. The network cable will click into place when it is fully inserted.
CAUTION: Do not connect the Adept SmartFleet EX appliance to the
internet.
Adept recommends that you use Category 5 or better wiring and connectors for your network.
If you must use Category 3 wiring, limit the network speed to 10 Mbps to ensure reliable oper-
ation.
NOTE: Ethernet configuration for the Adept SmartFleet EX is covered in Con-
figuration on page 27.
3.5 Connecting USB Peripherals
To attach a USB peripheral, plug the peripheral cable into one of the four USB jacks on the
Adept SmartFleet EX.
3.6 Sound Connections
The connectors for sound (LOUT, LIN, and MIC), while functional, currently have no appli-
cation to Adept systems.
3.7 Expansion Slots
The Adept SmartFleet EX provides two slots for PCIe cards.
l
GigE - one port/card
The two Ethernet ports that are standard on the Adept SmartFleet EX are usually suf-
ficient, so this is not a common option.
A slot will be covered with a blank if there is not a card in it.
Adept SmartFleet EX User’s Guide, Rev. A
Page 25 of 54