adept technology IO Blox, Руководство пользователя, Страница: 22 / 52

Chapter 2 - Installation
22 Adept IO Blox User’s Guide, Rev B
Mounting onto the End of an L18 Module
1. Position the IO Blox on the L18 module end cap; align the two mounting holes on
the sides of the IO Blox with the corresponding two holes on the end cap.
2. Secure the IO Blox to the T-bracket cover with two M4x8 screws. See Figure 2-12 .
Figure 2-12. Mounting onto an L18 Module
IO Blox
Mounted
on L-18
Module