adept technology IO Blox, Руководство пользователя, Страница: 15 / 52

Installation on an Adept Cobra s350 System
Adept IO Blox User’s Guide, Rev B 15
2.4 Installation on an Adept Cobra s350 System
Mechanical Mounting
For Adept Cobra s350 robots, the IO Blox can be mounted on a DIN rail - see “Mounting
on a DIN Rail” on page 12 .
Cable Installation
1. Locate the IO Blox-to-Robot cable supplied with the system.
2. Connect the end of the cable with the matching D-sub connector to the EXPIO
connector on the MB-40R.
Figure 2-6. IO Blox Cable Connection to Cobra s350 Robot System
3. Connect the other end of the cable to the JCBL1 connector on the IO Blox. See
Figure 3-1 on page 27 for the location of JCBL1.
NOTE:
To install multiple IO Blox devices, see “Installing Multiple IO
Blox Devices” on page 10 .
MB-40R
IO Blox Device
To EXPIO
on MB-40R
Adept Cobra s350 System
(robot not shown)