terminals together may cause sparks, burns, or a fire.
20. Do not dispose of damaged or worn out battery into household waste, fire or water.
21. Damaged or worn out battery packs/batteries should be collected, recycled or disposed of
in an environmental-friendly manner.
GENERAL DESCRIPTIONS
1. Locking Cover
5. Battery Indicator Light
2. Work Light
6. Battery
3. Switch Trigger
7. Reversing Switch Lever
4. Torque Setting Panel
8. Belt Buckle
INSTRUCTIONS FOR OPERATION
Installing or Removing Battery
CAUTION:
Only use designated battery. Using other manufacturer’s battery may cause injury and loss of
property because of explosion.
Do not remove the battery forcibly.
Please set the reversing switch lever to the
center position, avoid triggering switch to
cause danger when installing and removing
battery.
To install the battery firmly, insert it properly all
the way until it locks in place with a little click.
If not, it may accidentally fall out of the tool,
causing injury to you or someone around you.
Avoid overexerting or hammering the battery
into the motor housing with the help of other
objects. (Fig. 1)
To remove the battery, press the unlocking
buttons on both sides of the battery and pull
out the battery according to the direction of
arrow. (Fig. 2)
Charging Indicator Light
CAUTION:
If 4 lights flash at the same time, the tool may
be overloaded or overheated. As temperature
recovers or over-load protection is removed,
press the switch and the tool can be started
normally.
Current power of the battery will be indicated by
the battery indicator light when pressing the
battery button or switching on the tool. (Fig. 3)
Содержание MAC AFRIC SDRILC-007
Страница 1: ......