Ademco Vista 10SE Quick Guide
https://alpha.adt.com/help/23.html[11/8/2018 11:29:03 PM]
alarm event history.
Security Codes
Your system allows additional security codes for use by other users, however only the Master user can
assign user codes to users.
To
add a user
code
, enter your [Master code] + [8] + [new user number] + [ 4-digit new user’s
code].
To
delete a user code
, enter your [Master code] + [8] + [user number]. Wait approximately three
seconds for the keypad to verify.
For more information on this topic please please view the
.
Trouble Conditions
Trouble conditions are indicated by the word CHECK and continual beeping from the touchpad. Any key
will silence the beeping. A display of CHECK + zone no. may indicate that a problem requires your
attention. Check the specified zone area, close any open doors or windows and enter your security code
and press [OFF]. If your system includes wireless sensors, the CHECK condition may be caused by some
change in the environment of the protected area.
To silence trouble beeps, press any key or enter your security code and press [OFF].
For a complete list of Trouble Conditions, please refer to the
page.
Volume
The volume on the Ademco Vista 10SE is not adjustable.
How can we help?
Search
