ADEMCO 8132, Установка и настройка

Страница: 7 / 88

2-1
S E C T I O N 2
Mounting and Wiring
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
In This Section
♦
Mounting Symphony/Symphony-i
♦
Wiring Symphony/Symphony-i
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
Mounting Symphony/Symphony-i
Symphony/Symphony-i should be mounted using the following criteria:
•
Symphony/Symphony-i must be mounted indoors, and
•
Symphony/Symphony-i should be mounted at eye level for easy viewing by the user.
To mount Symphony/Symphony-i, see Figure 1 and complete the following steps:
1. Detach the case back by pushing up into the two tabs located at the bottom of
Symphony/Symphony-i with the blade of a screwdriver while pulling the case back and
case front apart.
2. Locate the case back over the mounting surface such that the opening in the case back is
aligned with the wire/cable access opening (in the mounting surface) while passing the
wires/cable through the opening in the case back.
3. Secure the case back to the mounting surface using four screws (supplied).
Prior to attaching the case front to the case back, be sure to wire the Symphony/Symphony-i as
described in the "
Wiring Symphony/Symphony-i " paragraph in this section.
MOUNTING
SCREWS (4)
(TYP)
WALL OR
MOUNTING
SURFACE
CASE
FRONT
CASE
BACK
AUI-017-V0
Figure 1. Mounting Symphony/Symphony-i