AVH23 Hand Dryer
Installation Instructions and User Guide
Telephone:
0117 923 5375
Fax:
0117 923 5374
Victoria Road, Avonmouth, Bristol BS11 9DB www.addvent.co.uk
ISSUE 1/0116
IMPORTANT SAFEGUARDS
WHEN USING ANY ELECTRICAL APPLIANCE, BASIC SAFETY
PRECAUTIONS SHOULD ALWAYS BE FOLLOWED.
PLEASE READ ALL INSTRUCTIONS CAREFULLY
AND RETAIN FOR FUTURE REFERENCE
Waste electrical products should not be
disposed of with household waste.
Please recycle where facilities exist.
Check with your local authority or retailer
for recycling advice
TWO YEARS
EXCHANGE
2
IP
Operation
Maintenance
Power supply
220-240V AC; 50/60Hz
Rated input
W
2300
Drying Time
secs
60 secs (max)
Sensing Distance
mm
120 ±3
Air speed
m/s
20
Body dimension
WxHxD mm
267x235x210mm
Net weight
kG
3.5
Specifications
AVH23
X1
After washing hands shake off excess water droplets.
Place hands approx 100mm under the air outlet, the infra-red sensor will
automatically activate the unit.
During drying, rub your hands to aid the drying time.
The nearer your hands are
to the unit, the more efficient the drying will be.
Remove hands when dry.
After 2 seconds, the unit will automatically stop running.
After 60 seconds continuous drying, the unit will stop and will need to be
reactivated if further drying is required.
It is recommended that all surfaces of the AVH23 hand dryer are cleaned regularly
using a soft cloth and a non-abrasive/non-caustic cleaning fluid.
If the unit malfunctions, consult a competent electrician or the Addvent Technical
department for advice where the unit is under warranty.
AVH23
ZONE
U
AVH23[16]instructions 26/2/16 10:30 Page 1
