Additel AD685Ex, Руководство пользователя

Страница: 21 / 63

13
2.Operation
2.1
Main Display
Main display as shown in Figure 2:
Menu bar: To access to the main functions of the gauge
Status bar: Including USB status, Bluetooth, battery, DIFF, absolute pressure and filtering status icons. The
Bluetooth icon can be clicked to turn on or off Bluetooth, when the battery icon is blank and flashing, Bluetooth will be
turned off automatically. When the battery power is too low, it will prompt the low battery to automatically turn off and will
start to countdown to turn off the gauge automatically. When the 4-20 mA module is enabled, the battery icon is not
displayed. Units and prompt information display area: Display engineering units or function items and other information.
Main display area: Display pressure values and other information.
Sub display area: Display a multi-digit value, or it can be divided into two left and right values for display, and
supports the display of Min, Max, Atm, sec,
℃
,
℉
and% icons at the same time.
Zero/Ok Button: Pressure zeroing, value reset and confirmation operations.
icon means the touch screen is in sleep state, use the 4 physical buttons on the top can wake up the gauge.
After waking up, if there is no touch operation in the main interface for 60 seconds, the touch screen will automatically
enter the sleep state, and this icon will be displayed on the main interface at the same time (Except the secondary menu
interface, once you enter the secondary menu interface, the pressure gauge touch screen will always be awake).