PA 200
Software
17
Fig. 7-1: ADDIREG registration program (example)
Table:
Board name:
Names of the different registered boards (e.g.: APCI-3200).
Base address:
Selected base address of the board. For PCI boards the base address is allocated
through BIOS.
i
WICHTIG!
The base address set in ADDIREG must correspond to the one set
through DIP switches.
Access:
Selection of the access mode for the ADDI-DATA digital boards.
Access in 8-bit or 16-bit or 32-bit mode.
PCI bus/device/(slot):
Number of the used PCI bus, slot, and device. If the board is no PCI board, the
message "NO" is displayed.
Interrupt:
Used interrupt of the board. If the board supports no interrupt, the message "Not
available" is displayed.
For PCI boards the interrupt is allocated through
BIOS.
