PA 7300
Technical description Chapter 5
12
5.2
Installing the software
The board is supplied with a CD-ROM.
The CD contains:
- ADDIREG for Windows NT 4.0 and Windows 95,
You can also download the ADDIREG program from Internet.
- Standard software for the ADDI-DATA boards:
- 16-bit for MS-DOS and Windows 3.11
- 32-bit for Windows NT/95.
5.2.1 Software installation under MS-DOS and Windows 3.11
- Copy the contents of PA7300\16bit on a diskette.
If several diskettes are to be used, the directory content is stored in several sub-
directories (Disk1, Disk2, Disk3...).
- Insert the (first) diskette into a driver and change to this drive.
- Enter <INSTALL>.
The installation program gives you further instructions.
5.2.2 Software installation under Windows NT / 95
- Select the directory PA7300\32bit\Disk1.
- Start the setup program "setup.exe" (double click)
- Select one of the 3 parameters
1-
typical
2-
compact
3-
custom
Proceed as indicated on the screen and read attentively the "Software License"
and "Readme".
In "custom", you can select your operating system.
The installation program gives you further instructions.
