Technical description Chapter 5
APCI-7501
11
5.1.3 Plugging the board into the slot
••••
Discharge yourself from electrostatic charges.
••••
Insert the board
vertically into the chosen slot.
Fig. 5-3: Inserting the board
•
Fasten the board
to the rear of the PC housing with the screw
which was fixed on the back cover.
Fig. 5-4: Fastening the board at the back cover
••••
Tighten all the loosen screws.
5.1.4 Closing the PC
•
Close
your PC as described in the manual of the PC manufacturer.
