10
IN
S
T
A
L
L
A
T
IO
N
C
O
N
FI
G
U
R
A
T
IO
N
O
P
ER
A
T
IO
N
FU
R
T
H
ER
IN
F
O
R
M
A
T
IO
N
IN
D
EX
Optional RC4 remote control
The optional RC4 remote control unit (part number: RC4-8P8C) can be used to provide
direct push button access to any channel from your desktop. The RC4 remote control
is supplied with a 3 meter cable that is used to link with the
OPTIONS
port on the rear
panel of the switch.
IMPORTANT: Do not connect the OPTIONS port to any network.
To connect the remote control
1 Connect either end of the supplied cable to the socket at the rear of the RC4 remote
control.
2 Connect the other end of the cable to the
OPTIONS
port on the rear panel of the
switch.
Patch cable
(Included in RC4-8P8C kit)
Using the RC4 with the optional CCS-XB module
When the optional CCS-XB LED monitor indicator module is used with the CCS-PRO4
switch, it requires permanent use of the latter’s
OPTIONS
port which would otherwise
be used to attach the RC4 remote.
However, the CCS-XB module has an output port that provides a link through to the
OPTIONS
port (to which it is connected) that can be used to attach the RC4 remote.
To connect the remote control to the CCS-XB module
1 Use the Adder Free-Flow utility to program the CCS-PRO4 switch (see the section
).
2 Use the patch cable supplied with the RC4 kit to link the RC4 to the
TO KEYPAD OR
PC
port of the CCS-XB module.
The RC4 remote can now be used in the usual manner to select the required
channels.
IMPORTANT: Do not
connect the OPTIONS
port to any network.
11
IN
S
T
A
L
L
A
T
IO
N
C
O
N
FI
G
U
R
A
T
IO
N
O
P
ER
A
T
IO
N
FU
R
T
H
ER
IN
F
O
R
M
A
T
IO
N
IN
D
EX
Optional LED monitor indicator connections
The optional CCS-XB module enables you to add LED (Light Emitting Diode) monitor
indicators to each of your video display screens to show which are active.
The CCS-XB module connects to the
OPTIONS
port of the main CCS-PRO4 switch.
Each individual LED monitor indicator then connects to one of the ten ports on the
CCS-XB module.
Notes: The CCS-XB module MUST be connected before the switch is powered on, otherwise the
module will not be recognized. Also, if the module is temporarily disconnected from the switch
during operation, communication between the two will cease and the switch will need to be re-
powered with the CCS-XB module attached.
To connect the CCS-XB module and monitor indicators
1
link the module to the
OPTIONS
port of the CCS-PRO4 switch.
can be attached to the CCS-XB module later (see
here
).
2 Link each LED monitor indicator to a port on the CCS-XB
module - ports 1 to 4 are most commonly used.
Adder CCS-PRO4
switch
Link cable
(Included in CCS-XB kit)
Adder CCS-XB
module
3 You need to tell the CCS-PRO4 which LED monitor indicator to illuminate (and in
which colour) for each channel. To do this connect your computer to the CCS-PRO4
switch via a
network connection
and use the Free-Flow application. Please see the
section
.
4 Apply power to the switch.
LED monitor indicator with
3 meter lead
Port 2
Port 3
Port 4
Insert the lead for
into port 1
Each indicator has an adhesive pad to
assist with mounting on your video
displays.
IMPORTANT: Do not
connect the OPTIONS
port to any network.
