AdderView
Installation and Use
Page 25
AdderViews as this avoids the need to use long hotkey sequences that may be hard
to remember. Older style AdderView OSD (blue / white) front panels may be
cascaded together with your new style AdderView OSD (black / silver front panel).
For example, consider a situation where two AdderView units are connected
together as shown below. To connect to the computer attached to port 3 on
AdderView B the user would hold down the hotkey keys then press ‘2’ followed by
‘3’, whilst keeping the hotkey keys pressed. This will have the effect of connecting to
port ‘3’ of the AdderView which is connected into port ‘2’ of the first AdderView unit
A. For example to connect to port 3 on the AdderView cascaded off port 2 of your
first AdderView use:
press
ba
ba2
2
release
2
2
press
3
3
release
3
3ba
ba
A typical cascade of two AdderViews
