Safety information
• For use in dry, oil free indoor environments only.
• Both the AdderView PRO unit and its power supply generate heat when
in operation and will become warm to the touch. Do not enclose them or
place them locations where air cannot circulate to cool the equipment. Do
not operate the equipment in ambient temperatures exceeding 40 degrees
Centigrade. Do not place the products in contact with equipment whose
surface temperature exceeds 40 degrees Centigrade.
• Warning - live parts contained within power adapter.
• No user serviceable parts within power adapter - do not dismantle.
•
Plug the power adapter into a socket outlet close to the module that it is
powering.
•
Replace the power adapter with a manufacturer approved type only.
•
Do not use the power adapter if the power adapter case becomes damaged,
cracked or broken or if you suspect that it is not operating properly.
•
If you use a power extension cord with the AdderView PRO unit, make sure
the total ampere rating of the devices plugged into the extension cord does
not exceed the cord’s ampere rating. Also, make sure that the total ampere
rating of all the devices plugged into the wall outlet does not exceed the
wall outlet’s ampere rating.
•
Do not attempt to service the AdderView PRO unit yourself.
Warranty
Adder Technology Ltd warrants that this product shall be free from defects in
workmanship and materials for a period of two years from the date of original
purchase. If the product should fail to operate correctly in normal use during the
warranty period, Adder will replace or repair it free of charge. No liability can be
accepted for damage due to misuse or circumstances outside Adder’s control.
Also Adder will not be responsible for any loss, damage or injury arising directly
or indirectly from the use of this product. Adder’s total liability under the terms
of this warranty shall in all circumstances be limited to the replacement value of
this product.
If any difficulty is experienced in the installation or use of this product that you
are unable to resolve, please contact your supplier.
