Thank you for choosing the ADDCOM ADD-699 Handset Lifter.
This lifter is designed to allow you to answer and end calls remotely from your desk when
using an ADD-670, ADD-680 or an ADD-C7 wireless headset system.
This box contains:
1. A handset lifter
2. An external microphone cord
3. Adhesive tape to attach lifter
4. This user manual
5
3
2
1
4
9
3
8
7
6
1. Connection Cord
Cable to connect lifter to wireless base station.
2. Ring detection LED
Blinks when it detects the phone is ringing.
3. Noise cancelling
Works to reduce false alarms by detecting surrounding background
microphones 1& 2
noise.
4. Handset supporting lever
Can be adjusted to the left and right side to support a handset.
5. Lifter arm
Lift the handset when ringing is detected and the button on the
base/headset is set to “ON”. Lifting height can be adjusted using by
the slide switch (9) to accommodate different handset heights.
6. External microphone jack
An alternative ring detector if the lifter and speaker do not align.
7. Adhesive tape
Used to affix the lifter on telephone.
8. Ring detection microphone
Detect when your phone rings and will transfer the signal to the
wireless base and headset.
9. Slide switch
Used to adjust the lifting height of the lifter arm height for different
handsets. Height can be adjusted from 1 (lowest) to 3 (highest).
Features
www.addcom.com
ADDCOM ADD-699
Handset Lifter
User Manual
