ADCMT 4601 I-V Meter, Руководство по эксплуатации

Страница: 76 / 236

4601 I-V Meter Operation Manual
3.6.2 Saving Parameters
3-24
Press or or rotate the rotary knob to select User-1 .
Example display
Press to load the parameters from User-1.
Example display
The descriptions of these parameters are as follows:
User-0 Loads the parameters from User-0.
User-1 Loads the parameters from User-1.
User-2 Loads the parameters from User-2.
User-3 Loads the parameters from User-3.
Default Loads the initial values.
Press to exit the menu.
3.6.2 Saving Parameters
The setting parameters can be saved to the non-volatile memory, areas User-0 to User-3 separately.
The 4601 can start up with the parameters saved in User-0 at power ON.
For information on how to load the parameters, refer to Section 3.6.1, “Loading Parameters.”
For information on how to start the 4601 with the parameters saved in User-0, refer to Section 3.6.3, “Auto
Parameter Loading at Power ON.”
The following is an example to save the parameters to User-3.
Operating procedure
Press . The MENU key goes ON.
Example display
Press or or rotate the rotary knob to select G) PARAMETER from the categories.
Example display
5
6
7
1
2