ADCMT 4601 I-V Meter, Руководство по эксплуатации

Страница: 162 / 236

4601 I-V Meter Operation Manual
6.5.3 Output Format Selection
6-16
6.5.3 Output Format Selection
Either of the following two output formats of the measured values can be selected before measurement
starts (DC mode) or before measurement memory data is output (sweep mode).
6.5.4 ASCII Output Format
Measured value format
When data is output in an ASCII format, each measured value is output as follows:
When multiple data sets are output, the data sets are separated by commas (“,”).
Format Description
ASCII
• Outputs one value as a 12-byte (header OFF) or 15-byte (header ON) ASCII character string.
• The internal processing time for data output is longer than in a binary format.
Binary
• Outputs one value as an 8-byte binary value (double-precision decimal value).
• The internal processing time is shorter than in an ASCII format as the value does not need to
be converted into an ASCII character string.
• Consideration is required when data is loaded into a PC.
±
E

[BD]
Block delimiter
Exponent part
Mantissa part
Header
±
E

,
• • • • •[BD] ± E

,