ADCP-61-141 • Issue 2 • May 1999
1059141 Rev A Page 1
© 1999, ADC Telecommunications, Inc.
FLC Four Position Universal
Wall Mount Cabinet DS3 Adapter Kit
Installation Instructions
Content Page
INTRODUCTION
...........................................................................
1
Revision History
......................................................................
1
Trademark Information
.................................................................
1
Admonishments
......................................................................
1
..............................................................
1 DS3 ADAPTER KIT INSTALLATION PROCEDURE
.................................................
2 CUSTOMER INFORMATION AND ASSISTANCE
..................................................
INTRODUCTION
These installation instructions provide the procedures for installing the DS3 Adapter Kit in the
Fiber Loop Converter Four-Position Universal Wall Mount Cabinet. The DS3 Adapter Kit is
required whenever a DS3 Fiber Loop Converter is installed in the Four-Position Universal
Wall Mount Cabinet.
Revision History
ISSUE DATE REASON FOR CHANGE
Issue 1 06/92 Original
Issue 2 05/99 Update to current format style.
Trademark Information
ADC and ADC Telecommunications are registered trademarks of ADC Telecommunications, Inc.
Admonishments
Important safety admonishments are used throughout this manual to warn of possible hazards
to persons or equipment. An admonishment identifies a possible hazard and then explains
what may happen if the hazard is not avoided. The admonishments — in the form of Dangers,
Warnings, and Cautions — must be followed at all times. These warnings are flagged by use
of the triangular alert icon (seen below), and are listed in descending order of severity of
injury or damage and likelihood of occurrence.
Danger: Danger is used to indicate the presence of a hazard that will cause severe personal
injury, death, or substantial property damage if the hazard is not avoided.
