ADC AVIDIA SWD4573I1, Руководство пользователя, Страница: 434 / 658

Configuring IDSL Alarm Profiles
408 Avidia System Configuration and Management User Manual
Deleting IDSL Line Profiles
1 In the
IDSL Line Configuration Profile Table
window, locate the table row that contains the
IDSL line configuration profile you want to delete.
Click and if necessary to view the entire table. displays the beginning of the
table. displays the next page of the table.
2 Select the Delete check box next to the row that contains the profile you want to delete. To
select the Delete check box for all rows (except the default profile, which cannot be
deleted), click Check All .
If you decide not to delete a selected row, clear the Delete check box next to the row. Click
Clear All to clear the Delete check box for all rows.
3 Click Delete Checked Row(s) to delete the profiles.
A confirmation dialog displays.
4 Do one of the following:
•
Click OK to delete the selected table rows.
•
Click Cancel to not delete the table rows.
C
ONFIGURING
IDSL A
LARM
P
ROFILES
IDSL alarm profiles determine the conditions that generate SNMP traps. When the configured
thresholds are met or exceeded, the SNMP agent sends a trap to the configured trap receiver(s).
You assign alarm profiles to IDSL ports during port configuration. A default profile exists with
an index of 1. You cannot delete the default profile.
To configure an IDSL alarm profile:
1 Access the IDSL Port Configuration window (see “Configuring IDSL Service” on page 411 ).
2 Click the Alarm Profile Browse button.
You cannot delete profiles that are assigned to ports. You cannot delete the
default profile.