p
o
w
e
re
d
b
y
The following instructions guide you in adding the temperature module to the
ADC AdView
™
Modular Diagnostic Station
. Included in the Temperature Module Kit
are the temperature module, temperature probe, and a box of probe covers.
The temperature module attaches to the top of the BP module.
It is made up of the following two pieces:
• Part A with the display.
• Part B, the back cover, which holds
the temperature probe and probe
cover box.
Adding the Temperature Module
1. Using the Power button on the right side of the BP module,
ensure that the
ADC AdView
™
Modular Diagnostic Station
is turned off.
2. Remove the cover plate from the top of the BP module.
3. Slide part A of the temperature module along the guides on the
top of the BP module from front to back until it snaps into place.
All the segments of the temperature module display will light when
the modules have been connected correctly.
