Adtemp
TM
II 412
Digital Fever Thermometer
USE, CARE &
MAINTENANCE
®
Intended Use:
A digital thermometer is a device used to measure the body temperature of a patient by means
of a transducer coupled with an electric signal amplification, conditioning, and display unit.
Safety Information:
• High, prolonged fever requires medical attention especially for young children.
Please contact your physician.
• Do not allow children to take their temperatures unattended.
• Read the enclosed instructions carefully to ensure accurate temperature readings. Temperature
readings are affected by many factors including exercise, drinking hot or cold beverages prior to
taking a reading as well as technique.
• Do not allow children to walk or run during temperature taking. The rigid probe could present
a hazard. Oral, underarm, and rectal temperatures vary by approximately 1°F (0.5°C).
• Dispose of batteries in accordance with locally applicable regulations, not with domestic waste.
• CAUTION:
Do not take an axillary temperature through patient’s clothing. Direct probe cover to
skin contact is required.
• CAUTION:
Biting the probe tip while taking a temperature may result in damage to the probe.
• CAUTION:
Do not autoclave. Please note the cleaning procedures described in this manual
•
WARNING:
This product may contain a chemical known to the state of California to cause cancer,
birth defects, or other reproductive harm.
• WARNING:
Keep battery out of children’s reach. Swallowing battery could be harmful.
Battery should not be recharged or placed into extreme heat as it may explode.
Specifications
Size
5”L x 3/4”W x 3/8”H (12.7cm L x 1.905cm W x .9525cm H)
Weight
0.49 oz (14 grams)
Display:
LCD, Liquid Crystal Display
Battery:
1.5v(LR41)
Battery Life:
Estimated 1,500 uses
Measurement Time:
Oral 60 Seconds / Rectal 40 Seconds / Axillary 90 Seconds
Measurement Range:
90.0°F to 109.9°F / 32.0°C to 43.9°C
Accuracy:
0.2°F / 0.1°C between 96.0°F to 107.0°F / 34.0°C to 42.0°C at
a room temperature of 64.4°F to 82.4°F / 18°C to 28°C
+/-0.5°F/0.3°C between 90.0°F to 96.0°F/32.0°C to 34°C and
107.0°F to 109.9°F/42.0°C to 43.9°C
Measurement Mode:
Real measurement with peak-hold method
Auto Turn Off:
In approximately 8’40”+/-1 minutes
Memory Feature:
Stores last temperature taken.
Operating Environment:
10 °C to 40 °C, humidity: 15 % to 95 % (noncondensing)
Storage Environment Temp:
-25 °C to +60 °C, humidity: 15 % to 95 % (noncondensing)
WARRANTY:
This Thermometer is guaranteed for a period of 24 months from date of pur-
chase. This warranty does not cover batteries, or damage resulting from improper handling or
use. Specific legal rights stipulated in your state may guide this warranty. If you have a legitimate
claim under this warranty, send item(s) postage paid to Service Center, Attn: Repair Dept.,
55 Commerce Dr., Hauppauge, NY 11788. Please include your name and address, phone
no., proof of purchase, and a brief note explaining the problem., your return address and
$2.00 to cover shipping and handling.
Visit
www.adctoday.com
to view this instruction booklet in other languages.
IB p/n 93-412-00 rev 3 Printed in China
Read the instructions carefully
before using this device.
Type BF applied part
Dist. by: ADC
®
55 Commerce Drive,
Hauppauge, NY 11788
Inspected in the USA
Made in China
tel: 631-273-9600
toll free: 1-800-232-2670
fax: 631-273-9659
www.adctoday.com
email: [email protected]
Onbo Electronic (Shenzhen) Co., Ltd.
No. 497, Ta Laneg Nan Road, Ta Laneg Street,
Baoan District, Shenzhen, China
Microlife AG, Espenstrasse
139, 9443 Widnau, Switzerland
0044
EC REP
93-412-00 rev 3 w/CE_ADTemp 93-412-00 rev 3 CE 10/17/14 10:35 AM Page 1
