manualshive.com logo in svg

ADB Safegate RELIANCE Shallow Base, Руководство пользователя

Поделиться
Скачать
ADB Safegate RELIANCE Shallow Base Скачать руководство пользователя страница 21

Base options

Image examples

Base 8”-135-X-T-X

Base 12”-150-X-T-X

The option includes:

T – Replaceable, locking type stainless steel thread elements.

Used when the light fittings are fixed with bolts.

Figure 7: Bolts

Base 8”-135-X-S-X

Base 12”-150-X-S-X

The option includes:

S – replaceable stainless steel stud bolts. Used when the light

fittings are fixed with nuts.

Note

This option is only available with metric threads.

Figure 8: Nuts

Base 8”-135-X-X-M

Base 12”-150-X-X-M

The option includes:

M – For light unit fixing with metric threads.

Figure 9: Metric

Base 8”-135-X-X-U

Base 12”-150-X-X-U

The option includes:

U - For light unit fixing with UNC threads.

Note

This option is only available with locking type

stainless steel thread elements.

Figure 10: UNC

UM-0106, Rev. 1.0, 2019/12/19

11

Copyright 

©

 ADB Safegate, All Rights Reserved

Содержание RELIANCE Shallow Base















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды