ADB Safegate RELIANCE Intelligent Lighting Platform III, Руководство пользователя

Страница: 106 / 118

5.7 Self-test Feature
5.7.1 Functional Description Self-test Feature
The self-test consists of two switches inside the remote measuring the output voltage of the remote independently from each
other and limit it. A SRU type 111 or 112 has two independent switches to handle single failures . To deactivate one of them
via lucDMC to test whether one is broken. To understand this functionality, you can read the following steps of the self-test
procedure executed by the remote switch(es):
Test Steps — Self-test:
1. Check if current of the series circuit is above 4.0 A and remember last stored state.
2. Use lucDMC and the RFID reader DRH100 to start the self-test.
3. Check the result of the self-test.
Note
During the self-test, the lights will switch off.
The message "test done — test passed" is displayed in the self test state field if the test result was positive.
Figure 71: Test state — test passed
The test will be denied, the message is an indicator for a broken device.
If you choose the wrong current (less than 6,6 A), the error message "Test denied — wrong current" is displayed in the self
test state field.
RELIANCE Intelligent Lighting
Maintenance
94
Copyright
©
ADB SAFEGATE, All Rights Reserved