ADB Safegate RELIANCE Gate Sign Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 74

background image

CAUTION

Use of incorrect combination of gaskets, bolts and nuts can create severe damages to the product installation and

create multiple safety risks.
To obtain a safe and watertight installation the O-ring and retaining bolt stated in the document must be used.
You need to know what base the light fixture will be installed in, in order to choose the correct gasket, bolts and nuts.
Failure to follow these cautions can result in equipment damage or aircraft FOD.

1.1.6 Operation Safety

CAUTION

Improper Operation

Do Not Operate this equipment other than as specified by the manufacturer

• Only qualified personnel, physically capable of operating the equipment and with no impairments in

their judgment or reaction times, should operate this equipment.

• Read all system component manuals before operating this equipment. A thorough understanding of

system components and their operation will help you operate the system safely and efficiently.

• Before starting this equipment, check all safety interlocks, fire-detection systems, and protective

devices such as panels and covers. Make sure all devices are fully functional. Do not operate the

system if these devices are not working properly. Do not deactivate or bypass automatic safety

interlocks or locked-out electrical disconnects or pneumatic valves.

• Protect equipment with safety devices as specified by applicable safety regulations.
• If safety devices must be removed for installation, install them immediately after the work is

completed and check them for proper functioning.

• Route electrical wiring along a protected path. Make sure they will not be damaged by moving

equipment.

• Never operate equipment with a known malfunction.
• Do not attempt to operate or service electrical equipment if standing water is present.
• Use this equipment only in the environments for which it is rated. Do not operate this equipment

in humid, flammable, or explosive environments unless it has been rated for safe operation in these

environments.

• Never touch exposed electrical connections on equipment while the power is ON.

Failure to follow these instructions can result in equipment damage

1.1.7 Maintenance Safety

DANGER

Electric Shock Hazard

This equipment may contain electrostatic devices

• Do not operate a system that contains malfunctioning components. If a component malfunctions,

turn the system OFF immediately.

• Disconnect and lock out electrical power.
• Allow only qualified personnel to make repairs. Repair or replace the malfunctioning component

according to instructions provided in its manual.

Failure to follow these instructions can result in death or equipment damage

RELIANCE
Safety

4
Copyright

©

ADB Safegate, All Rights Reserved

«
...
8
9
10
11
12
...
»

Содержание RELIANCE Gate Sign











































































Отзывы:

Нет отзывов

Похожие инструкции для RELIANCE Gate Sign

Бренд: YachtSafe Страницы: 4

Бренд: Garmin Страницы: 2

Бренд: Garmin Страницы: 2

POCKET LOOX N100 series

Бренд: Navigon Страницы: 2

Бренд: Navigon Страницы: 180

Бренд: Navig8r Страницы: 55

eXtreme BT-Q818XT

Бренд: Qstarz Страницы: 6

Бренд: Qstarz Страницы: 101

Бренд: SBG Systems Страницы: 11

Бренд: Navman Страницы: 64

Бренд: Alien Страницы: 104

echoMAP 40 Series

Бренд: Garmin Страницы: 68

Бренд: Transplant Computing Страницы: 30

Бренд: WhereSafe Страницы: 3

ZS-BT1 - Boombox With Bluetooth Technology

Бренд: Sony Страницы: 2

Бренд: Sony Страницы: 2

Бренд: Sony Страницы: 2

Бренд: Sony Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды