Adaptive Technologies Group MM-3RDX-18 Скачать руководство пользователя страница 1

MM-3RDX-18

REV00-05042015

1 of 2

Installation Guide

Speaker Ceiling Mount

Step 1: A ½ NPT pipe should already been installed from the ceiling before 
proceeding to attach the MM-3RDX-18 (Figure 1).

Step 2: Attach MM-3RDX-18 to 1/2 NPT pipe, then lock with set screw 
(Figure 1).

Step 3: Secure speaker to the speaker adapter plate
Pull a suffi

  cient length of signal wire and safety cable to reach the speaker’s 

terminal block and safety cable anchor point. Align the speaker’s four 
mounting points with the mount’s matching hole pattern. Use the speaker 
manufacturer’s recommended fasteners; tighten fasteners permanently 
through the mount and into the speaker cabinet (Figure 2).

MultMount-3RDX-18 provides a wide range of speaker aiming positions and 
adapts to standard off -the-shelf schedule 40 ½” NPT threaded steel pipe. This 
allows the speaker to be positioned as close or as far away from the ceiling as 
desired. The speaker mount employs two standard mounting hole patterns, 
the 2” x 4-1/4” and the 2-3/4” x 5”. The ceiling mounting plate adapts to most 
overhead structures, including ceiling trusses, beams, Unistrut and other 
structural components.

Note to installers

Due to the wide variety of wall structures, materials and mounting 
methods, these instructions assume that the installing contractor will 
exercise proper judgment in selecting the mounting area and hardware.

As a guide, the installation, when complete should be capable of supporting 5 
to 10 times the actual applied load. Always use a back up safety system such as 
a safety cable.

To assure a trouble free installation, read through and follow these instructions 
carefully before beginning. If you have doubts about 
the integrity of the structure you are mounting to or you are not 
sure about the proper hardware to use, consult a structural and/or hardware 
specialist. 

Be sure that all of the following items are included in this kit before proceeding:

1 pc Speaker Adapter Assembly 

1 pc Instruction sheet

Note: Screws and washers to attach speaker to adapter plate are not included

Figure 1

Figure 2

Figure 3

Отзывы: