Adaptive Recognition Einar 5, Руководство пользователя

Страница: 5 / 38

Page 5/38
EINAR 5 USER MANUAL
Adaptive Recognition America
Adaptive Recognition Hungary
Adaptive Recognition Nordic
Adaptive Recognition Singapore
SENDINFO@ADAPTIVERECOGNITION.COM
WWW.ADAPTIVERECOGNITION.COM
1.1. DEFAULT IP ADDRESS
According to the factory setting of the Einar cameras, they request IP address from the DHCP server.
The DHCP server lists the IP addresses of the DHCP clients, thus the received IP addresses belonging
to the cameras connected to the network can be seen on that interface.
1.2. LINK-LOCAL IP ADDRESS
If there is no DHCP in the network the cameras will get a default IP address based on their MAC
address (Serial Number). The cameras will also be accessible via their link-local IP address.
For example: if the MAC address of the camera is 00-19-B4-01-42-1A, than its IP is 169 .254.aa.bb; ‘aa’
is the decimal value of the digit one before the last in the MAC address (hexa 42, decimal 66), ‘bb’ is
the decimal value of the last digit in the MAC address (hexa 1A, decimal 26), so the IP is 169.254.66.26.
1.3. FINDING CAMERAS
The cameras on the network can be found by using the Einar DeviceTool .
During running, the program continuously looks for detectible cameras on the network and displays
them in a list where the current IP address of the camera can be read. If the cameras still do not
appear, then make sure that the firewall does not block the multicast protocol on the network and the
cameras and the PC logically are in the same network range.