Adaptive Recognition Carmen ANPR BOX Скачать руководство пользователя страница 12

Страница: 12 / 59

Carmen Box

USER MANUAL

Page 12/59

Adaptive Recognition

America

Adaptive Recognition

Hungary

Adaptive Recognition

Nordic

Adaptive Recognition

Singapore

[email protected]

WWW.ADAPTIVERECOGNITION.COM

4.5.

OVERLAY

In the middle, at the bottom of the window, is the [Overlay] button. With it, you can turn on/off the OSD,
and you can view the masks of the applied detectors, image information, motion data, etc.

The overlay can be displayed in LIVE and PLAYBACK mode, as well as in any submenu of the SET-

TINGS menu where the video stream is visible, e.g.

{External

You can

manage the associated Onvif devices in the External menu. You can add a new device, edit

the data of existing devices and delete a device.

For the added ONVIF device the Video button will only appear if the device does support a video chan-
nel. The IO button only appears if the added ONVIF device supports IO. Clicking on the Video or IO
button will switch to that menu item.

The following should be set when adding a new device:

•

Name: (optional): The name of the device can be entered.

•

Adress: IP address where the device is accessible.

•

ONVIF Username: The device's ONVIF username.

•

ONVIF Password: The device's ONVIF password.

Содержание Carmen ANPR BOX




























































Результаты поиска

Содержание Carmen ANPR BOX

Отзывы:

Похожие инструкции для Carmen ANPR BOX

Бренды по названию

Популярные бренды

Adaptive Recognition Carmen ANPR BOX, Инструкция по установке и эксплуатации

Результаты поиска

Содержание Carmen ANPR BOX

Отзывы:

Похожие инструкции для Carmen ANPR BOX

Бренды по названию

Популярные бренды