Adaptec Snap Server 700i Series, Руководство пользователя

Страница: 99 / 236

Creating and Modifying Pools
Chapter 8 Modifying Your iSCSI Storage 93
Resetting Authentication on Imported Logical Devices
If authentication was set on any logical devices before you exported the pool, it
must be reset once the pool is imported.
To reset authentication:
1
In the Enterprise View, select the iSCSI Storage Appliance you want.
2
In the Logical Devices View, right-click the words ‘
Logical devices
’, then select
Modify logical devices
.
The wizard opens to the Define Logical Devices screen.
3
At the top of the wizard, click the tab of the pool you want.
The logical devices for that pool are displayed.
4
( Optional ) Click inside the Authentication box next to a logical device and select
the authentication method.
Note
If possible, re-use the authentication settings that were set before you
moved the pool. If the pool contains automatically provisioned volumes, use new
authentication settings. (You must also reconfigure your iSCSI Storage Hosts
with these new settings.)
• If you select
CHAP
—Click
Set CHAP secret
, enter a user name and password,
then click
Add
. Click
Cancel
to close the window.
Note
If you are using CHAP with the Microsoft iSCSI initiator, the CHAP
password must be 12–16 characters long or it will be rejected by the iSCSI
initiator.
• If you select
SRP
—Click inside the
Scope
field to type a unique name for the
scope, or choose an existing name from the drop-down menu.
5
Click
Next
, click
Next
again, then review the configuration summary.
6
Click
Apply
, then click
Yes
.
The new settings are saved in the iSCSI Storage Appliance.
Right-click here