Adaptec Snap Server 700i Series, Руководство пользователя

Страница: 73 / 236

Backing Up Your Data with Snapshots
Chapter 6 Protecting Your Data 67
Ensuring Pool Capacity for Your Snapshots
Ensuring that there is adequate capacity in a pool to maintain your snapshots is
extremely important. Currently, when a pool reaches maximum capacity, all
snapshots contained within it go offline and are only retrievable manually.
Always carefully monitor the capacity of any pool that contains snapshots to avoid
the lengthy retrieval process and prevent snapshot loss.
Recovering from a Pool Capacity Warning
Adaptec Storage Manager generates a warning message when pool capacity reaches
5%. A second warning message is generated when pool capacity reaches 3%.
When you receive one of these messages, delete any unneeded volumes from the
pool or expand the size of the pool as soon as possible .
Recovering from a Pool Capacity Failure
If pool capacity becomes exhausted, all snapshots within that pool (and all the
volumes on which the snapshots are based) go offline, and Adaptec Storage
Manager generates a failure message.
To recover, see “Recovering Snapshots After a Pool Capacity Failure” on page 148.
Scheduling a Snapshot Job
If a job is lengthy and limits access to your iSCSI Storage Appliance, you may want
to set a date and time for the job to complete, instead of running the job while there
is activity on your IP SAN. If a job must be performed regularly, you can schedule it
to recur at preset times.
At this time, on the iSCSI Storage branch of Adaptec Storage Manager, you can
schedule snapshot jobs.
To schedule a job:
1
Complete each step of the task until you are prompted to click
Apply
. ( Don’t click
Apply
.)
2
Click
Schedule
.
The schedule window opens.
3
Set the date and time for the job.
Note
Keep geography in mind—If you are scheduling jobs on an iSCSI Storage
Appliance located in another geographical area, remember that the time you set
for a scheduled job is the Management Service’s time, which may be different from
local time or the iSCSI Storage Appliance’s time. You will be prompted to select a
new time if the one you’ve set occurs in the past on the Management Service.