Adaptec Snap Server 700i Series, Руководство пользователя

Страница: 127 / 236

Notifying Users By Email About Status and Activity
Chapter 10 Monitoring Status and Activity 121
Setting Up Email Notifications
This section describes how to set up email notifications for one Management
Service. If you have multiple Management Services on your IP SAN, you must
complete the tasks in this section for each one separately.
Before you begin, note this information:
• The address of your Simple Mail Transfer Protocol (SMTP) server (host name and
domain, or TCP/IP address)
• The name and email address of the person who will receive email notifications
(email notifications can be sent to only one email address
To set up email notifications:
1
In the Enterprise View, select the Management Service.
2
Click the
Configure
button, select the Management Service, then select
Email
Notifications
.
The Email Notifications window opens. The SMTP Server Settings window
opens if you haven’t set up email notifications previously. (If you have set up
email notifications previously, the SMTP Server Settings window doesn’t open—
skip to Step 5.)
3
Enter the address of your SMTP server and the “From” address to appear in
email notifications. If an email recipient will be replying to email notifications, be
sure that the “From” address belongs to a system that is actively monitored.
4
Click
Add
to save the settings.
5
In the Email Notifications window tool bar, click
Add email recipient
.
The Add Email Recipient window opens.
6
Enter the recipient’s email address, select the level of events for which the
recipient will receive an email, then click
Add
. (For more information on event
levels, see page 113.)
The email address is added to the Email Notification Manager. (Note that the
Add Email Recipient button is now greyed-out. Only one system can be in the
Email Notification Manager at a time.)
7
Close the Email Notifications window. Continue by sending a test message, as
described on page 122.
Repeat the steps in this section for each Management Service on your IP SAN.