Adaptec Snap Server 700i Series, Руководство пользователя

Страница: 104 / 236

Creating and Modifying Logical Devices
98 Snap Server 700i Series User’s Guide
Deleting a Volume
You can delete a volume, if required.
Caution
When you delete a volume, all data is destroyed.
To delete a volume:
1
In the Enterprise View, select the iSCSI Storage Host you want.
2
In the Volumes View, right-click the mirrored volume you want, then select
Delete volume.
3
Click
Yes
to delete the volume.
The job begins.
Creating and Modifying Logical Devices
In Adaptec Storage Manager, a logical device is an iSCSI target accessed by the iSCSI
initiators in the systems on your IP SAN. When you manually provision storage
manually, you begin by creating a logical device that you then log into from the
system and format locally. In Adaptec Storage Manager, logical devices appear in
the Logical Devices View.
Note
For more information about provisioning storage manually and
automatically, see “Step 4: Provisioning Storage to Your Systems” on page 40.
Once a logical device is created, you can use Adaptec Storage Manager to modify it.
This section describes how to:
• Create a new logical device after setup is complete (see the following section)
• Modify a logical device (see page 99)
• Delete a logical device (see page 100)
Note
To create or edit the Auto-discovery Control List for a logical device, see
“Limiting Discovery of iSCSI Targets with Auto-discovery Control Lists” on page
77.
Creating a New Logical Device
You can add new logical devices to your IP SAN at any time, as long as adequate
pool space is available.
To create a new logical device:
1
In the Enterprise View, select the iSCSI Storage Appliance.
2
In the Logical Devices View, select any pool.