Adaptec 5325301638 - Snap Server 4500 NAS, Руководство администратора

Страница: 121 / 148

Installing Third-Party Agent Software
107
7
To change to the agent directory, enter one of the following commands and press
Enter
:
cd /opt/uagent (for ARCserve 2000 v7 only)
cd /opt/CA/uagent (for ARCserve v9 and Enterprise v10)
8
To start the agent, enter the following command and press
Enter
:
./uagentsetup
The BrightStorARCserve agent is now installed.
9
Close the SSH client, and then return to the Administration Tool and do the
following:
a
To disable SSH on the Snap Server, navigate to the
System > SSH
screen, select
No , and then click
OK
. SSH is immediately disabled.
b
To start the newly installed backup agent, navigate to the
Maintenance >
Shutdown/Reboot
screen, and click
Reboot
.
10
Delete the agent files you copied to the Snap Server because they are no longer
needed.
11
To verify the success of the installation, use your backup management software
to configure and run a test backup.
Installing a VERITAS Backup Exec Agent
To install the VERITAS Backup Exec UNIX/Linux agent, use the following
procedure:
1
Connect to the Snap Server via SSH, and log in as admin using your admin user
password.
2
To change to superuser, enter the following command and press
Enter
:
su -
3
At the prompt, enter the admin user password, and press
Enter
.
4
To change to the agent directory, enter the following command and press
Enter
:
cd /shares/SHARE1/agent
5
To unpack the agent files, enter the following command and press
Enter
:
tar vxf filename.tar
where filename is the name of the agent file. Then press
Enter
to list the files and
directories that you are installing.