Adaptec 5325301507 - Snap Server 4400 NAS Скачать руководство пользователя страница 141

Страница: 141 / 250

SnapServer Administrator Guide

125

SnapServer Administrator Guide

125

Chapter 9

Trust Antivirus Software

The CA

Trust Antivirus software is preinstalled on all GuardianOS

SnapServers. By default, the software is enabled on most SnapServers, but

no scan jobs or signature updates have been scheduled. (The server will,

however, check for signature updates whenever the server boots.) These

and other antivirus configuration and management tasks are performed

using the CA

Trust Antivirus GUI, accessed from the

SnapExtensions > CA

Antivirus

screen of the Administration Tool. This section outlines the major

steps in configuring the antivirus software. See the GUI online help for

detailed descriptions of all options.

Note

Some SnapServers require a license before CA

Trust Antivirus can be

enabled.

Topics in Antivirus Configuration:

• Antivirus Dependencies
• Launching the CA eTrust Antivirus GUI
• The Local Scanner View
• Scan Job Configuration and Scheduling
• Signature Updates
• Alert Options
• The Move Directory
• Log View

Note

Antivirus functions or options not relevant to the SnapServer have been

disabled in the configuration GUI.

Содержание 5325301507 - Snap Server 4400 NAS



























































































































































































































































Результаты поиска

Содержание 5325301507 - Snap Server 4400 NAS

Отзывы:

Adaptec 5325301507 - Snap Server 4400 NAS, Руководство администратора, Страница: 141 / 250

Результаты поиска

Содержание 5325301507 - Snap Server 4400 NAS

Отзывы: