4
Warning:
Be careful when inserting the Adaptec SCSI Card
39320A in a PCI slot. Some 32-bit slots will not
accommodate it, and the card may break if you force it into
the slot.
4
Insert the Adaptec SCSI Card 39320A in the 64-bit (or 32-bit)
PCI or PCI-X expansion slot; press down firmly until the card
clicks into place, then replace the slot cover screw. When
installed properly, the card should appear level with the
expansion slot, as shown below.
Setting Up SCSI Devices
There are several things you may need to do to your SCSI devices
before you connect them to the Adaptec SCSI Card 39320A:
■
Check the SCSI IDs
■
Set the termination
■
Connect the power cables
Since setup can vary from device to device, always refer to the
device’s documentation for specific instructions.
ASC-39320A IG.fm Page 4 Tuesday, July 29, 2003 3:17 PM
