8-3
Installing the SCSI Driver For Windows 2000/2003 and XP
9
If you have no other controllers to add, press Enter to continue
with the Windows installation.
Installing Windows Server 2003 and Windows XP (64-bit)
1
Create a Windows driver disk. See
Note:
You will need to modify the Adaptec Ultra320 driver
disk for Windows in order to properly install Windows
64-bit Edition.
2
On the disk, rename the
TXTSETUP.OEM
on the root directory to
something like
TXTSETUP.I32
, and copy the
TXTSETUP.OEM
file
from the
\WINXP64\
directory to the root directory.
Note:
If you want to use this disk for installation of
Windows NT 4, Windows 2000, or Window XP (32-bit) in
the future, the previous
TXTSETUP.OEM
file will need to be
restored.
3
Start your system with the Windows CD in the CD-ROM drive.
Be sure to choose the CD-ROM boot option if working with an
EFI BIOS.
4
Press F6 when this message is displayed:
Press F6 if you need to install a third-party SCSI or RAID driver...
5
When prompted, insert the Windows driver disk created in Step
1 into drive
A
, and continue.
6
You are presented with a selection of driver choices. Select
Adaptec Ultra320 SCSI Cards (WinXP
IA64)
, and press Enter.
7
For Windows Server 2003
only—press S to use the driver on
the floppy disk.
8
If you have no other controllers to add, press Enter to continue
with the Windows installation.
9
You will need to restart your computer to finish setting up the
operating system.
U320 UG.book Page 3 Tuesday, September 23, 2003 1:47 PM
