4-2
Adaptec Ultra320 SCSI Cards User’s Guide
HostRAID supports the following RAID levels:
■
RAID 0—
Striping mode for boosting performance.
■
RAID 1—
Mirroring mode for data security.
■
RAID 10—
Mirrored striping for performance and data
protection.
For more information on supported RAID levels, see
Using the SCSISelect Utility
Using SCSISelect Utility Menus
To select a SCSISelect menu option, move the cursor to the option
with the arrow keys (
↑ ↓
), then press Enter. In some cases, selecting
an option displays another menu. You can return to the previous
menu at any time by pressing Esc.
Starting the SCSISelect Utility
To start the SCSISelect, follow these steps:
1
Turn on or restart your computer.
During the startup process, pay careful attention to the
messages that appear on your screen.
2
When the following message appears on your screen, press the
Ctrl-A
keys simultaneously (this message appears for only a
few seconds):
Press <Ctrl><A> for SCSI Select (TM) Utility!
3
From the device menu that appears, select a channel and press
Enter
.
Adaptec SCSISelect(TM) Utility vX.XX.
Arrow keys to move cursor, <Enter> to select option, <Esc> to exit (*=default)
*
39320A A at slot 6, 00:0E:00
39320A B at slot 6, 00:0E:01
U320 UG.book Page 2 Tuesday, September 23, 2003 1:47 PM
