Adaptec 1420SA - Serial ATA II RAID Controller Скачать руководство пользователя страница 7

5

Storage Management Software Overview

Storage Management Software Overview

Your RAID controller kit includes the following software tools:

Adaptec Storage Manager

—Storage management application 

software used to create, configure, and manage arrays.

Adaptec RAID Configuration (ARC) Utility

—Part of the 

controller’s built-in BIOS code that contains the following 
components: 

Array Configuration Utility (ACU)

—Used to create, 

configure, and manage arrays. 

SATA

Select

—Used to verify the hardware configuration of 

the controller and drives.

Disk Utilities

—Used to format and verify drives.

For details about any of these storage management tools, refer to 
the 

Adaptec Serial ATA II RAID 1420SA Installation and User’s Guide

.

The Adaptec 1420SA Controller

The Adaptec 1420SA controller is shown as follows. Note the 
position of the Serial ATA interface connectors necessary for 
attaching the Serial ATA disk drives.  

Internal Connectors

Mounting 
Bracket

AAR-1420SA QIG.book  Page 5  Monday, March 7, 2005  1:30 PM

Содержание 1420SA - Serial ATA II RAID Controller




















Отзывы: