User Manual
S E R I E S
11
Control Suite
Adamson CS
is a single software platform which allows the user to design and
deploy a system, all from a single interface. From room design and simulation to
connectivity and diagnostics, this unified platform reduces the need for additional
software in order to properly deploy and deliver complete audio systems.
Design
- Using basic geometric shapes, users are capable of designing a space; from
a basic field, to a complex structure. When arena or stadium design is needed, multi-
point Extrude and Revolve surfaces will easily allow you to set multiple inclines and
elevated surfaces with a few keystrokes.
Simulation
- After placing virtual cabinets in your room design, different aspects of their behaviour may be simulated, including
2D and 3D SPL, delta time of two cabinets, and speaker directivity.
Patch
- Quickly and effectively assign virtual loudspeakers to their real-world counterparts, then determine control zoning and
AVB routing to ensure complete control over your environment.
Optimization
- With DSP in every cabinet, you have more control than ever over your system. Adamson’s proprietary Optimization
algorithm gives you incredible control over the listening experience, taking advantage of each line array element’s on-board DSP
to deliver accurate, uniform sound.
Control
- Gain, Muting, Delay, EQ, and Grouping are all controlled on a single page, allowing you to build and fine-tune your system
with as little friction as possible. Implement your changes on a per-box level or use control zones to shape the performance of
multiple cabinet groupings.
Metering
- Access input and output metering for all online devices on one page, so you can reliably determine headroom for
your entire system.
Diagnose
- Monitor your system with a comprehensive set of system insight tools including spectral impedance and
displacement, inclinometer monitoring, clip and limiter tracking, power consumption, and AVB stream statistics.
For more information, see the Adamson CS User Manual.
