ADAMS SAXOPHONE PLAYING STAND
TENOR AND BARITONE SAXOPHONE
ADAMS MUSIC CENTRE
ADAMS-MUSIC.COM
Страница 1: ...ADAMS SAXOPHONE PLAYING STAND TENOR AND BARITONE SAXOPHONE ADAMS MUSIC CENTRE ADAMS MUSIC COM ...
Страница 2: ... placed back carefully Unscrew the two parts of the clamp with the hex key Place the second part of the clamp over the saxophone and turn the hexagonal socket screw fixed in the clamp Slide the first half with the extending pin over the reinforced ring of the bell Connection part of low C and B key Tighten the clamp securely with the hex key until the clamp can no longer move 1 2 3 4 5 Tenor Tenor...
Страница 3: ...g the stand not the saxophone into the right position This is necessary to guarantee stability Place the stand on the floor make sure all plastic nuts are open and slide the saxophone into the stand with the clamping strap Tighten the 2 plastic nuts one on the clamp and one on the stand height adjustment Now take the playing stand and loosen the large wing nut at the bottom of the stand with the w...
Страница 4: ...and must not be loosened This makes the standard unstable and can cause damage to your saxophone ADAMS ITTERVOORT NL Aziëstraat 17 19 NL 6014 DA Ittervoort info adams nl 31 0 475 56 07 00 ADAMS LUMMEN B Bosstraat 73 B 3560 Lummen info adams music be 32 0 13 35 20 20 Set the correct height by adjusting the lower plastic wing nut and raise the support to the prefered position If necessary turn the m...
