ADAM OPEL CD 300, Руководство пользователя

Страница: 171 / 213

Navigation 171
By distance
By setting a distance the section of
route from the current position to the
set distance can be excluded from the
route guidance.
Set the desired distance, press the
multifunction knob and then confirm
the displayed message.
The route is re-calculated taking into
account the excluded route section.
Note
The route blocking entered remains
active until a new route calculation is
performed.
Remove all route blockages
After selecting this option, all areas/
route sections previously selected as
to be excluded from the route
guidance will be taken into account
again for route guidance.
Dynamic guidance
If dynamic route guidance is active,
the entire current traffic situation that
the Infotainment system receives via
TMC is included in the calculation of
the route. The route is suggested
taking into account all traffic problems
or restrictions as per pre-set criteria
(e.g. „shortest route“, „avoid
freeways“ etc.).
In the case of a traffic problem (e.g.
traffic jam, closed road) on the route
driven, a message is displayed and a
voice message output indicating the
nature of the problem. The driver can
decide whether to drive around the
traffic problem taking the suggested
change to the route or to carry on
through the traffic problem.
Nearby traffic problems are also
reported if route guidance is not
active.
If route guidance is active, the system
continuously checks, based on the
traffic information, whether it would
be better to recalculate the route or
take an alternative route taking into
account the current traffic situation.
The activation and deactivation of
dynamic route guidance, as well as
criteria for the calculation of the route
and other settings for navigation, are
made in the Navigation options menu
3
162.